9657-10 – Clamp On Leak Sensor

Hioki

Voltage Output Sensor for Leak Current Measurements

Hioki

9657-10 – Clamp On Leak Sensor, For the PW3360/65, PW3198/3197, LR8513 and similar products

Overview

Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9657-10 is a voltage output clamp sensor for measuring leak current. The high-permeability magnetic material of the sensor’s core and magnetic shield enables high-precision measurement of very weak currents.

Key Features

  • For general purpose leak current testing
  • Also supports load current testing
  • Check for insulation faults
Category:
Rated primary current AC 10 A (for leak current measurement, 50/60 Hz)
Max. allowable input (45-66 Hz) Max. 30 A of continuous input
Rated output current AC 100 mV/A
Amplitude accuracy (45-66 Hz) ±1.0 % rdg. ±0.05 % f.s.
Phase accuracy ±3 ° (at 50 Hz or 60 Hz)
Frequency characteristics 40 Hz to 5 kHz: ± 3%
(Add to amplitude accuracy)
Measurable conductor Insulated conductor
Core diameter φ 40 mm (1.57 in)
Dimensions and mass 74 mm (2.91 in)W × 145 mm (5.71 in)H × 42 mm (1.65 in)D, 380 g (13.4 oz), Cord length: 3 m (9.84 ft)
Accessories Instruction manual ×1

Brands Carousel