EDX-200A-1 – Universal Recorder

Kyowa

The EDX-200A is a high-end Universal Recorder, which is as user-friendly as EDX-100A. Various conditioner cards are available for wide applications.

Kyowa

EDX-200A-1 – Universal Recorder

Summary

  • High-speed/low-speed dual sampling
  • Measurement of high-speed and low-speed phenomena while reducing data quantities is possible.
  • Built-in real-time digital filters
  • 8th digital filters enable to acquire clear waveform
  • All channels synchronous sampling at 10 kHz for 32 channels (100 kHz for 3 channels)
  • EDX-200A-4T can operate under high or low temperature range -20 to 65?C
  • One-wire synchronous (Except EDX-200A-1)
  • Up to 8 units in decentralized arrangement for large-scale measurement is possible.

Technical Specifications

Channels 8
Conditioner Slots 1
Measuring Targets Strain (Gage, transducer), voltage, thermocouples, pulse (F/V),
piezoelectric acceleration (Built-in amplifier), CAN signals
Analog Input The conditioner cards for EDX series
CAN Data Input CAN card (2 ports, max. 256 channels): CAN-41A
Voice Memo Input 1 channel (Input voice memo data is recorded together with the measurement data.)
Use remote control unit RCU-42A. (Optional accessory)
Use the Data Analysis Software DAS-200A (optional accessory) to play back recorded voice memos.
Sampling All channels synchronously
Sampling Mode : Normal: All channels collected using the same sampling frequency.
Dual: High-speed or low-speed, collected using 2 types of sampling frequency set for each channel
Sampling Frequencies : Normal Mode
1-2-5 series 1 Hz to 100 kHz
1 Hz to 2 kHz When using CAN-41A
2n series: 2 Hz to 65536 Hz
2 Hz to 2048 Hz When using CAN-41A

Dual Mode High-speed sampling (Expressed as Sf)
1-2-5 series 1 Hz to 100 k Hz
2n series: 2 Hz to 65536 Hz
Low-speed sampling (Expressed as “Ss”)
1-2-5 series The division frequencies from
high-speed sampling, and Ss ? Sf/4
2n series: The division frequencies from
high-speed sampling, and Ss ? Sf/4
Acquisition Channels
Normal Mode Max. 32 channels, 320 k/I (I is the integer part of the set sampling frequency.)
Dual Mode Max. 64 channels, 320 k/I (I is the integer part of the set sampling frequency.)
Using CAN-41A Channels of CAN data
Digital Filter Butterworth filter (IIR)
Type of filter : LPF, HPF
Order of a Filter : 1 to 8
Amplitude ratio at cutoff point : -3 dB
Attenuation : -6 x N dB/oct. (N is filtering times )
Simultaneously use with built-in LPF possible.
Application on CAN data not possible.
Data Recording CF cards, 128 MB to 16 GB (Kyowa recommended items)
Maximum data file size (Available for data acquisition):
4 GB for 1-time measurement
1 GB for repetitive measurement, 2 times or more
Display CH status display LED: 8.
Unit status display LED: 4.
Operating Switch REC/PAUSE: Start/pause data recording.
STOP: Stop data recording.
BAL.: Implement balance (Balance adjustment)
LOAD: Read and configure conditions from CF card
OPT. : Execute arbitrary configured functions
ID: EDX identifier configuration
POWER: Power switch
USB/LAN: Communications I/F, switchable
External Control Connector CONT. IN
(Remote control, for synchronous operation)
Interfaces USB (USB2.0 High Speed) 1 port
Connector configuration: Series B receptacle
Setting Conditions Online : From the PC via LAN or USB port
Offline : By reading from the CF card which has measuring conditions.
Written with the data acquisition software DCS-100A
Saving Conditions Recording of conditioner configuration conditions and measurement conditions within the EDX built- in nonvolatile memory.
Immediate start of data collection using the previously configured measurement conditions after power-on is possible.
Measuring Modes Manual measurement/trigger measurement/interval measurement
Manual Measurement : Data recording is manually started or stopped when data is recorded to a preset number of measured data.
Manual mode allows recording of voice memo during data recording.
Trigger Measurement : Data recording is automatically started when the preset trigger condition is satisfied.
*No CAN data of CAN-41A is used as the trigger condition.
Interval Measurement : Automatically recording functions based upon previously-set interval conditions
Combination with measured mode when in dual sampling
Combination with Measured Mode when in Dual Sampling : (High-speed sampling channel – Low-speed sampling channel)
Manual setting – Manual setting
Trigger setting – Manual setting
Trigger setting – Interval setting
Interval setting – Interval setting
Recording Start/Stop PC, operation switch (panel screen),
or using dedicated remote control
Balance Adjustment Operation Strain input channel balance adjustment is performed using PC, operation switch (panel screen), or dedicated remote control
Recording Data Format Kyowa standard file format KS2
Analysis using optional Data Analysis Software DAS-200A is possible.
Data Collection Online using PC, or offline direct reading from CF card to PC
TEDS Only when using online control from a PC
Supported conditioner cards: CDV-40B (-F), DPM-42B (-F), DPM-42B-I (-F), CCA-40A (-F), CDV-44AS, CDA-44AS, CDA-45AS, CVM-41A
Power Supply 10 to 33 VDC
Connector type: RM12BRD-4PH (Hirose)
Use DC power source or adapter (Optional accessory)
Current Consumption Approx.1.0 A
(12 VDC with 1 CDV-40B)
Operating Temperature 0 to 50?C
Operating Humidity 20 to 90%RH (Non-condensing)
Storage Temperature ?20 to 60?C
Vibration Resistant 49.0 m/s2 (5 G), 5 to 55 Hz 1 cycle 1 min., each axis 15 cycles (Non-operating)
29.4 m/s2 (3 G), 5 to 55 Hz 1 cycle 1 min., each axis 15cycle (Operating)
Impact Resistant 294.2 m/s2 (30 G) /11 ms
Dimensions 148 W x 53 H x 257 D mm excluding protrusions
Weight Approx.0.9 kg (1.1 with 1 CDV-40B)
EMC Directive EN61326-1 (Class A)
RoHS Directive EN50581
Standard Accessories DC power cable P-76 (1.8 m)
USB cable N-38 (1 m)
Ground wire P-72 (5 m)
CF card (1 GB) inserted in the slot
Fuses (8 A for 4-slot model, 5 A for 2-slot model)
Dummy panel
Installed on the free slots before shipment
EDX-200A-4H: 3 pcs
EDX-200A-2H: 1pc
EDX-200A-4T: None
EDX accessory bag
Dynamic data acquisition software DCS-100A (DVD)
Instruction manual (In English & Japanese, in the above DVD)
Optional Accessories AC adapter UIA345-12 (For U.S.A.: UNI345-1238)
Fixing adapter
EDX dummy panel EDX1P-DUMMY
Remote control unit RCU-42A
Battery unit for instantaneous power failure EDB-41B
Monitor unit EMON-20A
Synchronous cables N-95, N-128

 

Others

N/A