This is a data logger that can be mounted on centrifugal force loading monitoring equipment.
Channels: Max. 32 Channels, 4 slot
| Channels | 32 |
| Slot | 4 |
| Conditioner Cards for Analog Inputs | Optional conditioner cards Implement with Strain/Voltage card and Thermocouple card installed |
| Sampling Method | Simultaneously all channels |
| Normal-sampling Mode | 1/2/5 system 1 Hz to 100 kHz 2n system 2 Hz to 65536 Hz |
| Dual-sampling Mode | High-speed Sampling [Sf] 1/2/5 system 1 Hz to 100 kHz 2n system 2 Hz to 65536 Hz Low-speed Sampling [Ss] 1/2/5 system: Divide the 1/2/5 system of the high-speed sampling, where Ss ≤Sf/4 |
| Dual-sampling Mode (High-speed +low-speed setting channel) | 1 Hz to 100 kHz (1/2/5 system) :When measuring 1 ch 1 Hz to 50 kHz (1/2/5 system): When measuring 3 ch 1 Hz to 20 kHz (1/2/5 system) : When measuring 8 ch 1 Hz to 10 kHz (1/2/5 system) : When measuring 16 ch 1 Hz to 5 kHz (1/2/5 system) : : When measuring 32 ch |
| Data Recording Unit | CF card Capacity: 128 MB to 16 GB (our recommended only) |
| Indicator | Channel status LEDs: 32 MCA-300A status LEDs: 7 MCA-300A status small indicator: 1 |
| External Control Connector | CONT. IN and CONT. OUT (for trigger and synchronous operation) |
| Communication Interfaces | USB (USB2.0 High Speed) 1 port Connector: Series B receptacle connector LAN (10/100BASE-T) 2 ports LAN IN connector: For PC communication LAN OUT connector: For synchronous operation Connector: RJ45 modular jack connector |
| Synchronous Operation | Maximum 8 MCA-300A units can be connected for synchronous operation by using synchronous cables N-128. Maximum 8 MCA-300A units can be connected for synchronous operation by using LAN cables. |
| Saving Conditions | Store the conditioner cards setting conditions and measuring conditions in nonvolatile memory in the MCA-300A. |
| Vibration Resistance | 49.0 m/s2 (5 G), 5 to 55 Hz 1 cycle 1 min., each axis 15 cycles (when not in operation) 29.4 m/s2 (3 G), 5 to 55 Hz 1 cycle 1 min., each axis 15 cycles (when in operation) |
| Impact Resistance | 196.1 m/s2 (20 G)/11 ms |
| Static Load Resistance | 490.33 m/s2 (50 G) |
| Power Supply | 10 to 36 VDC Connector type: RM12BRD-4PH (HIROSE ELECTRIC CO., LTD.) |
| Current Consumption | Approx. 2.6 A (12 VDC with four CDV-40B cards installed) |
| Outside Dimensions | 175(W)×150(H)×254.5(D) mm (Excluding protrusions) |
| Standard Accessories | DC power cable P-76 CF card |
| Optional Accessories | AC adapter UNI345-1238-AC (If using outside Japan, a separate AC power supply cable will need to be purchased.) |
