RM3542A – Resistance Meter

Hioki

  • High-Speed High-Stable Resistance Meter with Low-impact Resistance Measurements for Miniature 008004-size Electronic Parts

Hioki

RM3542A – Resistance Meter

Overview

Hioki DC resistance meters measure a broad range of resistance values at a high level of precision. The RM3542A delivers high-speed and high-stability measurements and improved productivity by minimizing variations and reducing contact errors. In addition, the low-impact measurement technology lets you measure resistance for miniature 008004-size electronic parts.

Key Features

  • Applied voltage limit function lets you switch the detection voltage to 5 V or less
  • Contact improvement function suppresses rush current to aid in probing of super-small components
  • Extensive selection of measurement ranges ensures the right detection voltage and delivers stable measurement
  • Scaling function corrects for mounting state and test stage differences
Category:

Technical Specifications

Resistance range [at Low Power OFF] 100 m? range (Max. 120.0000 m?, 0.1 _? resolution) to 100 M? range (Max. 120.0000 M?, 100 ? resolution), 16 steps; [at Low Power ON] 1000 m? range (Max. 1200.000 m?, 1 _? resolution) to 1000 ? range (Max. 1200.000 ?, 1 m? resolution), 6 steps
Display Monochrome graphic LCD 240 _ 64 dot, white LED backlight
Measurement accuracy [with SLOW mode, at 100 m? range] ?0.015 % rdg. ?0.002 % f.s. ; [with SLOW mode, at 1000 ? range] ?0.006 % rdg. ?0.001 % f.s. (best case)
Testing current [at 100 m? range] 100 mA DC to [at 100 M? range] 100 nA DC
Open-terminal voltage 20 V DC max. (with applied voltage limit function enabled: max. 10 V DC)
Sampling rate FAST, MEDIUM, SLOW, 3 settings
Measurement times [at 100 ? /1000 ? ranges, with Low Power OFF] FAST: 0.9 ms, MED: 3.6 ms, SLOW: 17 ms (minimum time)
Integration time 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz. Note: PLC = one power line cycle (mains wave-form period)
Other functions Comparator (compare setting value with measurement value), Delay (set to allow for mechanical delay of trigger input and probing, or set to allow for measurement object response), Applied Voltage Limit Function, Scaling Function, OVC (offset voltage compensation), Measurement fault detection, Probe short-circuit detection, Improve contact, Auto-memory, Statistical calculations, Settings monitor (when using two instruments, a difference in settings causes warning notification), Retry, Trigger function. etc,.
Interfaces RS-232C, Printer, GP-IB (Model RM3542-51)
External I/O Trigger, Hold input, Comparator output, Settings monitor terminal
Power supply 100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions and mass 260 mm (10.24 in) W _ 88 mm (3.46 in) H _ 300 mm (11.81 in) D, 2.9 kg (102.3 oz)
Accessories Power cord _1, EXT. I/O male connector _1, Instruction manual _1, Operation guide _1

 

Others

N/A