UCAM-550A – Fast Data Logger

Technical Specifications

Models UCAM-550A: With DCS-100A
UCAM-550A-0: Without DCS-100A
Channels Maximum of 50 channels/unit (Possible up to 5 units of the measuring unit)
(Each measuring unit measures 10 channels.)
Measurement is possible up to 1000 channels at maximum by adding an optional software DCS-106A.
?The public command corresponds up to 20 units (Max. 1000 channels).
?DCS-100A corresponds up to 6 units (Max. 300 channels).
Sampling Method Synchronous sampling of all channels
Sampling Frequencies 1, 2, 10, 20, and 50 Hz
?Response frequency depends on the measuring unit.
USM-51B/52B*, USS-51B, USV-51B, UST-51B: DC to 7.8 Hz
Deviation:0.5 to -3.5 dB
*For temperature measurement with USM-51B/52B using scanning mode, the updating rate is approx. 1 s.
Measuring Functions Original value measurement
Measure value measurement
Interfaces 10 BASE-T, 100BASE-TX
Between PC and UCAM
?LAN cable (Straight) Max. 100 m
Between UCAM and UCAM
?STP straight cable (See notes) Max. 100 m
Note: “STP” is the initials of Shield Twisted Pair,
and an STP cable is a shielded LAN cable
Display LCD (20 digits x 2 lines)
Status display LED: POWER (When power ON, lit green)
MASTER (When master, lit green, when slave, not lit)
TRANSFER (When communications, flashing green)
Operation Keys UP, Down, Left, Right
Data Storage Measurement data is saved on a PC (No internal storage)
Operating Temperature 0 to 40?C
Operating Humidity 20 to 85? RH (Non-condensing)
Power Supply 100 to 240 VAC
Approx. 50 VA (With 5 USS-51B strain units installed, and 120 ? load on all channels connected)
Dimensions 426 W ? 132.5 H ?305 D mm (Excluding protrusions)
Weight Approx. 7 kg (With 5 USS-51B strain units installed)
Standard Accessories AC power cable P-18 (With a 2-pin conversion plug CM-39), ground wire P-72, DVD (DCS-100A, instruction manual)

Others

N/A