Kyowa
WGA-200A – Instrumentation Amplifier
Summary
- Voltage output, current output, and remote sensing are standard equipped.
- Compact and firm
- Dustproof and drip proof
The WGA-200A series is an Instrumentation Amplifier which is suitable to connect a strain-gage transducer to measure loads, pressure, torques or displacements.
Channels 1
Applicable Transducers 350 ? strain-gage transducers (Up to 4 transducers
with 350 bridge resistance connected in parallel)
Bridge Excitation 10, 4, 2 VDC (select one)
Remote sensing possible
Initial Adjustment ZERO??1.5 mV/V 18-turn trimmer
(Tare weight compensation) FINE
Sensitivity SPAN 1/1 to 1/100 18-turn trimmer
Adjustment Monitor Use the monitor in the front of the panel
Rated Output Voltage ?10 V (At C=1 mV/V and E=10 VDC)
Isolation output (-5 V to 10 V)
Current 4 to 20 mA (Corresponding voltage output 0 to 10 V)
Calibration 0.25, 0.5, 1, 1.5, 2 mV/V (Select one)
Frequency Response DC to 1, 10, 30, 100, 200, 500 Hz (Select one)
Operating Temperature -10 to 50?C
Operating Humidity 85%RH or less (Non-condensing)
Power Supply 100 or 200 VAC (Select one)
Dimensions 60 W ? 150 H ? 250 D mm (Excluding protrusions)
Weight Approx. 1.5 kg
Optional Accessories AC power cable P-23 (For 100 VAC), P-28 (For 200 VAC)
N/A